Skip to content
Hydraulic Steering Locks DD26 Fishing Gen 2 Mean Stops

Hydraulic Steering Locks DD26 Fishing Gen 2 Mean Stops

by DD26 FISHING
Sold out
$ 124.99 - $ 124.99
$ 124.99
$ 124.99 - $ 124.99
$ 124.99
SKU 26GEN2MS1
DD26 Fishing Generation 2 Mean Stops Steering Locks for boats 175hp-300hp in most cases

New patent pending design allows fitment for hydraulic steering systems with 3.75" and/or 4" of exposed steering rod on each side of the engine and will allow fitment with steering rods with diameters of 16mm, 3/4", 20mm and 7/8".   

The way this system works is that a standard steering lock set will come with the 3/4" clips attached.  Those clips result in a 4" width.   Should you have a hydraulic steering system that has a different width or diameter, you simply can purchase the proper clips for your set up and easily assemble them at your convenience.   Additional clips come in the following set ups:
  • 16mm diameter providing total unit width of 3.75"
  • 20mm diameter providing total unit width of 3.75"
  • 7/8" diameter providing total unit width of 4"

Fitment of a steering lock has NOTHING to do with the ENGINE itself.  So if you have a Mercury Engine it has nothing to do with the steering system.  Its all about which hydraulic steering system you have.


A good guide of common fitment is:  (but recommended to measure first)
  • Seastar steering systems - Usually 4" steering locks 3/4" Diameter (most common) (These clips come standard with the DD26 Gen 2 Mean Stops)
  • Seastar extra heavy tournament - Usually 4" steering locks with 7/8" diameter
  • Baystar steering systems - Usually 3.75" steering locks with 16mm Diameter
  • Mercury steering systems - Usually 3.75" steering locks with 20mm Diameter
  • Uflex steering systems - Usually 3.75" steering locks with 20mm Diameter Measure first